Blekk & Toner guide




Du er her // Forsiden // //
250W 85 + FSP250-60GHT

FSP/Fortron 250W 85 + FSP250-60GHT

Varenr: FSP250-60GHT
Lagerstatus: Forventet 08.08.2017
Frakt: 79,- Sjekk din fraktpris
Fyll inn postnummer og klikk
knappen for å vise fraktpriser
  Vis priser
418,-  inkl. mva


This is the specification of Model FSP250-60GHT,(85)F; AC-line powered switching power supply with active PFC (Power Factor Correction) circuit, meet EN61000-3-2 and with Full Range Input features. Also, +5Vsb power is less than 0.5Winput at power off mode (PS_ON input at high state) which is comply with ErP Lot 6 year 2013 requirement.


Model Name FSP250-60GHT,(85)F
Wattage 250W
Dimension 175mm (L) × 85 mm (W) × 70mm (H)
Product Highlight Efficiency Level 80PLUS Bonze
Erp Lot <0.5W
Input Voltage 100~240Vac
General Specification Effciency 80PLUS Bonze
PWOK Delay Time 500ms > PWOK > 100ms
EMC performance EN55022 class B
EN 61000-3-2
EN 61000-3-3
Input Electrical Specification Input Frequency 47 ~ 63 Hz
Input Current 115V< 3.0 Amps – rms
230V<1.5 Amps – rms
Environmental Requirement Temperature Range Operating : 10 to +50℃
Storage :-20 to +80℃
Humidity Operating : 85% to % RH, Non-condensing
Storage : 95% to % RH, Non-condensing
MTBF The power supply reliability when calculated by MIL-HDBK-217; latest revision, are exceed 100,000 hours with all output at 80% full load and an ambient temperature of 25℃.


Output Voltage and Current Rating

+3.3V +5V +12V1 +12V2 -12V +5Vsb
Ripple-Noise(R-P) mV 70mV 70mV 140mV 140mV 140mV 70mV
Regulation Load % ±5% ±5% ±5% ±5% ±10% ±5%
Output Max.(A) 14A 16A 14A 16A 0.5A 2.5A
Output Min.(A) 0.5A 0.3A 1A 1A 0A 0A