Blekk & Toner guide




Du er her // Forsiden // //
NetShelter SX Kit for einen seitlich

APC NetShelter SX Kit foreinen seitlich

Varenr: AR7742
Lagerstatus: Forventet 08.08.2017
Frakt: 89,- Sjekk din fraktpris
Fyll inn postnummer og klikk
knappen for å vise fraktpriser
  Vis priser
20 930,-  inkl. mva
Fra 634,-/mnd (56 mnd)
Utsett betalingen i 4-6 mnd
Velg finansiering i kassen

Rack Air Distribution

NetShelter SX 42U Duct Kit for Cisco Nexus® 7018

Air distribution for power dense racks and low pressure areas


Baying hardware, Foam gasket strips, Installation guide, Mounting Hardware, Side airflow ducts, Side baffles


Net Weight: 52.00 KG
Maximum Height: 2031.00 mm
Maximum Width: 267.00 mm
Maximum Depth: 1200.00 mm
Shipping Weight: 85.00 KG
Shipping Height: 550.00 mm
Shipping Width: 1395.00 mm
Shipping Depth: 765.00 mm
Rack Height: 42U
Color: Black


Standard Warranty: 2 years repair or replace
Environmental Compliance: RoHS,REACH: Contains No SVHCs


Unique design delivers cold air to the intake and isolation of hot and cold aisle ensuring cooler intake temperatures, increasing equipment life.

Increased cable capacity and manageability for high density cable entry/exit from the enclosure.

The Side Airflow Duct Kit for Nexus 7018 and NetShelter® SX 1200-mm Deep Networking Enclosure have been tested and approved by Cisco® for supporting Nexus 7018 datacenter networking switches and APC is listed as an approved vendor in the Nexus 7000 Series Site Preparation Guide.

Enclosures include pre-installed joining hardware to join enclosures in a row and provide additional stability to the enclosure.

Supports toolless installation of AR8444 fiber spools.

Specifically designed to work with Netshelter Enclosures.

Simplifies future planning by allowing side to side equipment to be placed anywhere in the data center.

Provides proper intake temperatures, increasing equipment life.

Overhead cable troughs and partitions install toollessly on the roof of the enclosure eliminating the need for ceiling mounted or underfloor mounted cable trays. Cable troughs and partitions are designed to manage both power and data cables while maintaining separation.

Large cable access slots in the roof provides access for overhead cable egress. The bottom design allows for unobstructed cable access through a raised floor.

Perforated front and rear doors provide ample ventilation for rack-mount equipment.

Features & Benefits

Provides proper intake temperatures, increasing equipment life.

Innovative design allows for fast, easy installation by almost anybody.