Blekk & Toner guide



Du er her // Forsiden // //


Varenr: ET-913MSC+
Lagerstatus: Forventet 13.11.2016
Frakt: 79,- Sjekk din fraktpris
Fyll inn postnummer og klikk
knappen for å vise fraktpriser
  Vis priser
1 288,-  inkl. mva

1000T to 1000SX Multi Mode 550M-SC


Wavelength 850nm

Best media conversion solutions for network connectivity
Edimax's full series of Media Converter are designed to meet the needs for massive optical fiber network, provide the whole Gigabit Ethernet network implementation.

Migrating between copper and fiber-based Medium
ET-913+ series convert the signals between two different transmission medium, allowing user a simple and cost-effective method to migrate between UTP cable and fiber optic cable. It can transmit signals up to 550m (multimode) and 10/20/30/60km (single-mode) in fiber medium, allowing users to extend network.

Comply with IEEE Standards
ET-913+ series are fully compliant with IEEE 802.3ab 1000 Base-T and 802.3z 1000 Base-SX/LX standards. The device comes with one RJ-45 port to connect to a 1000 Base-T device such as workstation or switch and one fiber connection to connect a 1000 Base-SX/LX device.

Feature LED and Fiber link alarm
User could monitor the device through Feature LED. In addition, Fiber Link Alarm could allow user to monitor and maintain their critical fiber link more effectively.

Unique voltage supervisor
Built in voltage supervisor IC will automatically reset all chipsets in converter as power voltage drop below 2.9V, this action can make sure fiber port and TP port work normally when thunder storm or power unstable occurring cause the power electricity suddenly down in an instant time.

Plug-and-Play Installation
Simply to plug the TP and fiber port to the device having the media convertibility.


  • Compliant with IEEE 802.3ab 1000 BaseT and IEEE 802.3z 1000 Base SX/LX Standards
  • One 1000 BaseT Gigabit Ethernet TP Port and One 1000 Base SX/LX Gigabit
  • Ethernet Fiber Port
  • One 1000 Base SX/LX Fiber Port can support either Multi or Single Mode
  • TP Port can support Half/Full-Duplex, Auto-MDI/MDI-X and Auto-Negotiation
  • Multiple Fiber Connectors
  • Providing 19" Converter Chassis for up to 16 slots with redundant power supply for optional expansion use



IEEE 802.3ab 1000 BaseT
IEEE 802.3z 1000 Base SX/LX
IEEE 802.3x Flow Control


Number of Ports:
1 1000BaseT with RJ-45 Connector
1 1000BaseSX/LX with Fiber Connector (Multi/Single Mode)

Data Transfer Rate


Transmission Media

TP: 1000 BaseT Cat. 5, 5E, 6 UTP/STP, up to
1000 Base SX:
50/125μm Multi Mode Fiber optic cable, up to 62.5/125μm Multi Mode Fiber optic cable, up to 1000 Base LX:
9/125μm Single Mode Fiber optic cable

LED Indicators

Per Port:
(TX): Link, TX
(FX): Link, RX
Per Unit: Power

Power Requirement


Power Consumption

10 Watts (Max)


102 x 74 x 22 (L x W x H)


240 g

Operating Temperature

0 to 60 ℃

Storage Temperature

-20 to 90 ℃


10 to 90% RH (non-condensing)


FCC Class B, CE