Blekk & Toner guide



Du er her // Forsiden // //
Eaton Powerware BladeUPS 12kW 400V w/ parallel cord

EATON Eaton Powerware BladeUPS 12kW400V w/ parallel cord

Varenr: ZC122P060100000
Lagerstatus: Forventet 07.11.2016
Frakt: 89,- Sjekk din fraktpris
Fyll inn postnummer og klikk
knappen for å vise fraktpriser
  Vis priser
64 608,-  inkl. mva
Fra 1.948,-/mnd (52 mnd)
Utsett betalingen i 4-6 mnd
Velg finansiering i kassen

BladeUPS Power System

The Powerware BladeUPS is a revolutionary power quality solution, expanding power protection from 12 kW to 60 kW in a single industry standard 19-inch rack, and most significantly, providing this robust, compact solution without generating the additional heat associated with legacy end-of-row, modular UPS products. The Powerware BladeUPS is designed to be the most flexible UPS on the market. It can be deployed in a number of configurations from a distributed architecture (one in every rack), to end of row (up to six units in a rack), to a central system (not on the IT floor, but in the electrical closet). In addition, the exceptionally high efficiency rating is not a large energy cost burden when installed inline with the output of a large, central UPS or in highly critical computing areas where dual UPS redundancy (2N) is required

Features and Benefits

  • Grows with expanding IT applications using scalable architecture
  • Reduces operating expenses with more flexible, compact configuration options than traditional end-of-row solutions
  • Extends battery life and optimizes battery recharge time with ABM® technology
  • Conserves valuable rack space with power-dense 6U form factor
  • Delivers the highest levels of reliability with patented Powerware Hot Sync® paralleling technology
  • Reduces single point of failure with an intelligent bypass design to eliminate human error
  • Simplifies service with hot-swappable battery and electronics modules

Service and Support

  • On-site installation and integration services
  • Remote monitoring solutions
  • Extended warranty and service plans

 Power Rating:  12-60 kW
 Input Voltage:  230-400V or 120-208V
 Output Voltage:  230-400V or 120-208V
 Frequency:  50 or 60 Hz
 Backup Times:  Typical 14 minutes at half load; extended battery modules available

General Characteristics

Power Rating 12 kW per UPS Module
Efficiency >97%
Heat Dissipation <371W/1266 BTU/hr. at 100% rated load
Cooling Fan cooled, temperature microprocessor monitored; front air entry, rear exhaust
Audible Noise, Normal Operation 50 dBA at 1 meter
Altitude Before Derating 1000 meters (3300 ft. ASL)

Input Characteristics

Input Voltage 208 Vac and 400 Vac models
Voltage Range 208V model: 180 to 265 Vac
400V model: 311 to 519 Vac
Frequency Range 50 or 60 Hz, ±5 Hz
Input Current Distortion <5% with IT loads (PFC power supplies)
Input Power Factor >.99 with IT loads (PFC power supplies)
Inrush Current Load dependent
Input Requirements Three-phase, four wire + ground
Bypass Source Same as input, (single feed)
Generator Compatibility Fast sync slew rate for generator synchronization

Output Characteristics

Rated Output Voltage 208V model: 180 to 255 Vac, Ph to Ph
400V model: 180 to 240 Vac, Ph to N
Output Configuration Three-phase, four wire + ground
Output Frequency (nominal) 50 or 60 Hz auto-detection on startup
Frequency Regulation 0.1 Hz free running
Load Power Factor Range Lagging: 0.7
Leading: 0.9
Total Output
Voltage Distortion
<3% with IT loads (PFC power supplies)
<5% non-linear or non-PFC power supplies

Battery Characteristics

Battery Type VRLA - AGM
Battery Runtime (Internal) 13 minutes at 50% load
4.8 minutes at 100% load
Battery String Voltage 240 Vdc
Battery Test Automatic battery test standard (remote scheduling capable).
Manual battery test from front display
Battery Recharge Profile ABM three-stage charging technology
Battery Cut-off Voltage Variable from 1.67 VPC at <5 min. runtime to 1.75 VPC at >90 min. runtime
Battery Low Condition Announced with alarm
Extended Battery Capability Yes, add up to four additional 3U battery enclosures (~34 min at 100% load,
>1 hour at 50% load)

Physical Characteristics

Dimensions (HxWxD)

10.3 (6U) x 17.4 x 26.0 inches
267 x 442 x 660 mm
5.2 (3U) x 17.2 x 26 inches
132 x 437 x 660 mm
Total Chassis Weight
without batteries or
Total Chassis Weight
with batteries or

100 lb. (46 kg)

307 lb. (140 kg)
Total UPS Weight without Batteries 135 lb. (61 kg)
Total UPS Weight with Batteries 307 lb. (140 kg)
EBM Weight 170 lb. (77 kg)

Communications and User Interface

Software Compatibility UPS ships with Software Suite CD containing LanSafe
power management software and trial version of PowerVision
X-Slot® Bays Two available for the cards listed below
Optional X-Slot Communication Cards  Application  Powerware Card
 WEB - TCP/IP  ConnectUPS-X Web/SNMP Card
 Modbus® RTU  Modbus Card
 IBM eServer™
(i5™, iSeries™,
or AS/400®)
 Relay Interface Card
 N/O, N/C
(dry contacts)
 Industrial Relay Card
 Parallel  Powerware Hot Sync CAN Bridge Card
 Remote Monitoring  Modem card
Control panel LCD Two lines by 20 characters
Four menu-driven interface buttons
Four status at a glance LEDs
Multi Language English standard; 20 other languages available
Configuration Changes User capable, firmware auto configures
Dry Contact Inputs Two, user configurable
Dry Contact Outputs One, user configurable


Installation User capable, located in the IT racks
Preventative Maintenance User capable, optional factory service available
Corrective Maintenance User capable, optional factory service available
Serviceability Features Hot-swappable batteries
Hot-swappable electronics module
Automated internal maintenance bypass
Auto-configure firmware
Flash firmware upgradeable


Safety 208V model: UL1778, cUL
400V model: CE
EMI 208V model: FCC Part15 Class A
400V model: EN62040-2 Class A
Surge Protection ANSI C62.41, Cat B-3
Hazardous materials (RoHS) EU Directive 2002/95/EC Category 3 (4 of 5)


Standard 12 months
Warranty Repair Factory depot repair or replace

Service Support Agreements2

Depot PowerTrust Express
On-site 5x8 PowerTrust Value
On-site 7x24 PowerTrust eight-, six- or two-hour response

Options and Accessories

Detachable input cord
Detachable input/output cord assembly
Detachable paralleling cord assembly
Extended Battery Modules (EBM)
3U output sub-distribution module
0U to 3U rack power strips
60 kW Powerware BladeUPS Parallel bar
Four-post rail kit
Environmental Monitoring Probe (EMP) for temperature and humidity monitoring
X-Slot Communication Cards (see Communications and User Interface above)