Blekk & Toner guide



Du er her // Forsiden // //
PC3200 DDR-DIMM 1024MB CL3 REG Registered,  ECC/REG, 2.5V, 128Meg x 72

CRUCIAL PC3200 DDR-DIMM 1024MB CL3REG Registered, ECC/REG, 2.5V, 128Meg x 72

Varenr: CT12872Y40B
Lagerstatus: Ingen på lager for øyeblikket
Frakt: 39,- Sjekk din fraktpris
Fyll inn postnummer og klikk
knappen for å vise fraktpriser
  Vis priser
505,-  inkl. mva


Module Details:

  • Part Number: CT12872Y40B
  • Module Size: 1GB
  • Package: 184-pin DIMM
  • Feature: DDR PC3200
  • Configuration: 128Meg x 72
  • Error Checking: ECC
  • Speed: DDR400
  • Voltage: 2.6V
  • Memory Timings: CL=3
A dual inline memory module (DIMM) consists of a number of memory components (usually black) that are attached to a printed circuit board (usually green). The gold pins on the bottom of the DIMM provide a connection between the module and a socket on a larger printed circuit board. The pins on the front and back of a DIMM are not connected to each other.
184-pin DIMMs are used to provide DDR SDRAM memory for desktop computers. Standard 184-pin DIMMs are available in PC1600 DDR SDRAM, PC2100 DDR SDRAM, PC2700 DDR SDRAM, and PC3200 SDRAM.
To use DDR memory, your system motherboard must have 184-pin DIMM slots and a DDR-enabled chipset. A DDR SDRAM DIMM will not fit into a standard SDRAM DIMM socket. (Information about which memory technology your system uses is included in the Crucial Memory Advisor™ tool.)
The number of black components on a 184-pin DIMM can vary, but it always has 92 pins on the front and 92 pins on the back, for a total of 184. 184-pin DIMMs are approximately 5.25 inches long and 1.25 inches high, though the heights can vary. While 184-pin DIMMs and 168-pin DIMMs are approximately the same size, 184-pin DIMMs have only one notch within the row of pins.