Blekk & Toner guide



Du er her // Forsiden // DATAUTSTYR // Harddisk & SSD // Tilbehør // Rammer og braketter //
2 x 5.25" bays for 3 S-ATA HDD,  Hot-Swap, full aluminium

CHIEFTEC 2 x 5.25" baysfor 3 S-ATA HDD, Hot-Swap, full aluminium

Varenr: SNT-2131 SATA
Fjernlager: 5+ tilgjengelig (sendes normalt etter 4-6 arbeidsdager)
Frakt: 79,- Sjekk din fraktpris
Fyll inn postnummer og klikk
knappen for å vise fraktpriser
  Vis priser
1 087,-  inkl. mva


Details for the SNT-2131 SATA Backplane
Interface SATA I & SATA II
Dimmensions (DxWxH) 202mm x 146mm x 86mm
Weight 1,3 kg
Form-Factor 2x 5 1/4 bays for 3 HDD's
Fan 80mm sleeve bearing fan
Power Connector 2x SATA and 2x Molex
Data Connector 3 x SATA
Supported Raid-Level's 0, 1, 5. (no Raid controller included)
Special Features

The Serial-ATA Backplanes aswell as the removable bays, are all exclusively designed and made of Aluminium so that they are especially suited to keeping the HDD's cool. The Backplane is Plug & Play compatible, it supports hot swap and the Raid-Level's 0, 1 and 5. With an 80mm fan, even the fastest Hard disks are kept cool. The operating status of each hard drive aswell as the power and the activity of the fans, are shown at the front of the Backplane by LED's. In addition there is a reset button, which is also used to stop the alarm for the fans. The Hard disks are screwed into the slots, which can then be easily removed by twisting the lock and a spring mechanism in the back will push them out.

Connectors at the rear side for:

  • Fan Failure detection LED
  • Reset switch for buzzer alarm and
  • Overheating LED
Included in delivery SATA Backplane, 3x SATA cable (120cm), set of screws, User manual