Blekk & Toner guide



Du er her // Forsiden // //
Smart-UPS X 3000VA Rack/ Tower LCD w NC

APC Smart-UPS X 3000VA Rack/Tower LCD w NC

Varenr: SMX3000RMHV2UNC
Lagerstatus: Forventet 26.10.2016
Frakt: 79,- Sjekk din fraktpris
Fyll inn postnummer og klikk
knappen for å vise fraktpriser
  Vis priser
21 985,-  inkl. mva
Fra 664,-/mnd (56 mnd)
Utsett betalingen i 4-6 mnd
Velg finansiering i kassen

APC Smart-UPS X 3000VA Rack/Tower LCD 200-240V with Network Card

APC Smart-UPS, 2700 Watts / 3000 VA, Input 230V / Output 230V , Interface Port SmartSlot , Extended runtime model , Rack Height 2 U


CD with software, Rack Mounting support rails, Smart UPS signalling RS-232 cable, Temperature Probe, User Manual, Web/SNMP Management Card


  • Output Power Capacity 2700 Watts / 3000 VA
  • Max Configurable Power 2700 Watts / 3000 VA
  • Nominal Output Voltage 230V
  • Efficiency at Full Load 98%
  • Output Voltage Distortion Less than 5% at full load
  • Output Frequency (sync to mains) 47 - 53 Hz for 50 Hz nominal,57 - 63 Hz for 60 Hz nominal
  • Waveform Type Sine wave
  • Output Connections (8) IEC 320 C13
  • (1) IEC 320 C19
  • (2) IEC Jumpers


  • Nominal Input Voltage 230V
  • Input Frequency 50/60 Hz +/- 3 Hz (auto sensing)
  • Input Connections British BS1363A
  • IEC-320 C20
  • Schuko CEE 7/EU1-16P
  • Cord Length 2.44 meters
  • Input voltage range for main operations 141 - 255,160 - 280V
  • Other Input Voltages 208,220,240
  • Transfer Time 2-4 ms

Batteries & Runtime

  • Battery Type Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
  • Typical recharge time 3 hour(s)
  • Replacement Battery APCRBC117
  • RBC™ Quantity 1

Communications & Management

  • Interface Port(s) SmartSlot
  • Pre-Installed SmartSlot™ Cards AP9631
  • Control panel LED status display with On Line : On Battery : Replace Battery and Overload indicators,Multi-function LCD status and control console
  • Audible Alarm Alarm when on battery : distinctive low battery alarm : configurable delays
  • Emergency Power Off (EPO) Yes

Surge Protection and Filtering

  • Surge energy rating 645 Joules
  • Filtering Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449
  • Data Line Protection --


  • Maximum Height 85.00 mm
  • Maximum Width 432.00 mm
  • Maximum Depth 667.00 mm
  • Rack Height 2U
  • Net Weight 37.32 KG
  • Shipping Weight 45.36 KG
  • Shipping Height 243.00 mm
  • Shipping Width 596.00 mm
  • Shipping Depth 869.00 mm
  • Color Black
  • Units per Pallet 8.00
  • # of Layers per Pallet 4
  • # of Units per Layer per Pallet 2
  • Pallet Weight 388.69 KG


  • Operating Environment 0 - 40 °C
  • Operating Relative Humidity 0 - 95%
  • Operating Elevation 0-3000 meters
  • Storage Temperature -15 - 45 °C
  • Storage Relative Humidity 0 - 95%
  • Storage Elevation 0-15000 meters
  • Audible noise at 1 meter from surface of unit 55.00 dBA
  • Online Thermal Dissipation 184.00 BTU/hr


  • Regulatory Approvals C-tick,CE,CSA,EN 50091-1,EN 50091-2,EN 55022 Class A,EN 60950,FCC Part 15 Class A,GOST,IRAM,UL 1778,VDE
  • Standard Warranty 3 years repair or replace (excluding battery) and 2 year for battery,optional extended warranties available,optional on-site warranties available
  • Environmental Compliance RoHS 7b Exemption,REACH: Contains No SVHCs,Contains Lithium Battery

Features & Benefits


Gives higher application availability by correcting low and high voltage conditions without using the battery.

Maximizes battery performance, life, and reliability through intelligent, precision charging.

Protects connected loads from surges, spikes, lightning, and other power disturbances.

Prolongs battery life by regulating the charge voltage according to battery temperature.

Automatically starts up the connected equipment upon the return of utility power.

Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Warns when a battery is not available to provide backup power.


Provides remote management of the UPS over the network.

Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition.

Quickly understand unit and power status with visual indicators.

Provides management of the UPS via a serial port.

Provides management of the UPS via a USB port (not available on all models).

Warns when a battery is not available to provide backup power.


Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

Provides early-warning fault analysis ensuring proactive component replacement.

Enables a quick recovery from overload events.

Provides early-warning fault analysis on batteries enabling timely preventive maintenance


Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.

Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.


Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

APC strømkabel for UPS IEC320
APC strømkabel for UPS IEC320
Strømkabel - IEC 320 EN 60320 C19 - hunn - CEE 7/7 (SCHUKO) - hann - 2.4 m
APC Netshelter 2 Post Open
APC Netshelter 2 Post Open
APC NetShelter 2 Post Open Frame Rack - Rack - black - 45 U - 19"
1 983,-
APC NetShelter SV 42U 600mm
APC NetShelter SV 42U 600mm
7 815,-
APC NetShelter SV 42U 600mm
APC NetShelter SV 42U 600mm
9 311,-